عنوان فارسی مقاله: راکتور در ChemCAD
عنوان انگلیسی مقاله:
فهرست مطالب
Reactors in ChemCAD
Different Types of Reactor Models
Stoichiometric Reactor
Stoichiometric Example
Process Flow Diagram for Example
Stoichiometric Reactor
Equilibrium Reactor
Equilibrium Reactor Example
Kinetic Reactor Module Basics
Included Assumptions
Kinetic Reactor Design Equations
Rate Expression
Kinetic Reactor Interface 1
Gibbs Reactor
Gibbs Reactor Interface
Gibbs Reactor Matrix
Gibbs Reactor Outputs
Advantages vs. Disadvantages
بخشی از مقاله
Equilibrium Reactor Example
Select reactor type (standard, methanation, shift)
Methanation reactor provides all necessary stoichiometry and equilibrium data specifically for example reactions 1 and 2
Select conversion mode
Reaction conversion ignores equilibrium data and uses a specified percent conversion
Approach delta T calculates equilibrium conversion at a certain temperature above or below reactor T
Approach fraction estimates conversion of reaction that does not completely reach equilibrium
دانلود رایگان مقاله پاورپوینت انگلیسی Reactors in ChemCAD
کلمات کلیدی:
ChemCAD tutorials - University of Marylandwww.isr.umd.edu/Labs/CACSE/A-Team/ChemCAD/tutorials/rxr.htmlChemCAD reactor simulations. There are four types of reactor modules in ChemCAD: Stoichiometric. Used for single reactions where the user specifies the ...Flow rate: 1000 kgmol/hrTemperature: 500 KComposition: 20 mole% N2, 80 mole% H2Pressure: 100 atm[PPT]Reactor Modelling in Chemceit.umd.edu/~nsw/chbe446/2014-present/Chemcad%20Reactor%20Modeling.pptxChemCAD gives the answers to your simulations in reports and graphs; The reports will ... Several different types of reactor unit ops are available in chemcad.[PPT]reactor Chemcad.pptx - Ece.umd.eduwww.ece.umd.edu/~nsw/chbe446/2015-present/reactor%20Chemcad.pptxReactors in ChemCAD. Joshua Condon, Richard Graver, Joseph Saah, Shekhar Shah. Different Types of Reactor Models. Several options are given in ...[PDF]Design of a Plug Flow Reactor (PFR)https://www.chemstations.eu/fileadmin/user_upload/Tutorial/CSE-T-Krea_EN.pdfIt is desired to achieve 80% conversion of ethane, operating the reactor isothermally at 1100 K and a pressure of 6 atm. CHEMCAD allows you with the kinetic reactor model to evaluate a plug flow reactor (PFR) or a continuous stirred tank reactor (CSTR). Both reactors have two operation modes: rating or design mode.
